Shipbuilding material EN10083-3 alloy steel 34CrMo4 materail plant in Cairo

Shipbuilding material EN10083-3 alloy steel 34CrMo4 materail plant in Cairo

Shipbuilding material EN10083-3 alloy steel 34CrMo4 materail plant in Cairo

Material SAE1006, standard ASTM A510M-82 belongs to low carbon steel. It has the characteristics of high elongation, smooth surface, mirror effect, thickness standard, flat plate shape, and rust resistance. It is suitable for all kinds of metal stamping and stretching with good performance. The main difference between the chemical composition of 1006 and 1008 is: the carbon content is inconsistent: SAE1006 contains C less than 0.08, and SAE1008 less than 0.10.

The proportion of main elements in Q345 steel is basically the same as that in 16Mn steel, the difference is that V, Ti, Nb microalloy elements are added. A small amount of V, Ti, Nb alloy elements can refine the grains, greatly improve the toughness of the steel, and greatly improve the comprehensive mechanical properties of the steel. Because of this, the thickness of , Q345 steel plate can be made larger. Therefore, the comprehensive mechanical properties of Q345 steel should be better than that of 16Mn steel, especially its low temperature properties. The allowable stress of Q345 steel is slightly higher than that of 16Mn steel.

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.

EN10083-3 alloy steel 34CrMo4 materail,For the estimation in April and the second quarter, the estimation on March 16 is still valid, but the decrease in April is 10% higher than the neutral prediction. It is a conservative estimation based on 10% for the high probability event. In the second quarter, the output of overseas pig iron will be reduced by 11.67 million tons, affecting the demand for iron ore of about 1.84 million tons; in the first half of the year, the output will be reduced by 18.899 million tons, affecting the demand for iron ore of 32.13 million tons.



Recently updated information