Application and heat treatment of 51crv4 steel round bar export
The main uses of flat steel are as follows. First, flat steel is used as a raw material for processing steel plates, which is convenient for transportation, takes up a small space, and can save transportation costs. Second, 51crv4 steel round bar export flat steel can be used as raw material for processing welded pipes. Flat steel can be a finished steel product, or it can be used as a billet for welded pipes and thin slabs for stacked sheets. Third, flat steel can be directly used as a steel structure. As a finished material, flat steel can be used for making hoop iron, tools and mechanical parts, and used as building frame structure and escalator in construction. Fourth, the flat steel has a smooth surface and a certain degree of beauty.
What is the difference between 51crv4 steel round bar export, 1Cr5Mo and Cr5Mo material? Generally, if the carbon content is greater than 1%, the number is not added before the steel number, that is, Cr5Mo; and when the carbon content is about 0.1%, the number 1 is added before the steel number to be 1Cr5Mo. So the alloying elements of 1Cr5Mo and Cr5Mo steel should be relatively similar, but the carbon content should be 10 times different.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
Hot Rolled Plates 51crv4 steel round bar export MachiningAfter final forging/forming and Heat treatment process, all the pipe Fittings, Flanges, Fasteners, Etc. are sent for machining i.e. and preparation, O/D and I/D matching as per dimensional codes. An Expert Q.C. engineer is involved and he keeps constant vigil on every machining operation. Step machining is carried out as required by the codes. GO and NO-GO gauges are used to check the O/D & I/D of the fittings, Flanges, etc.