51CrV4 steel for turbine part, AH36 stock

51CrV4 steel for turbine part, AH36 stock

51CrV4 steel for turbine part, AH36 stock

For the team, cooperation is the core idea of daily work, and the core of common cooperation is resource sharing. With a perfect resource sharing mechanism, the whole team can be called a unity spirit.A good team lies in the ability to transfer resources, knowledge and information in time among team members in order to achieve the common goals of the team. So that we can share experiences and lessons."

The yield strength of Q690D steel plate is 690 Mpa and the impact temperature is - 20℃. 51CrV4 steel for turbine part, Q690D steel plate has high strength, good plasticity and toughness, good weldability and good cold and hot performance. Q690D steel plate is mainly used to manufacture various large engineering structural components and construction machinery. Because of its high strength and good toughness, Q690D steel plate can reduce the self weight of components and meet the requirements of large-scale and lightweight engineering components and equipment under the condition of ensuring strength, stiffness and reliability.

Iron and steel goods, including pig iron, ingots, all kinds of steel and so on. Therefore, logistics companies are required to load evenly and evenly in the process of transportation, prevent moisture and prevent corrosion. It is necessary to prevent the 51CrV4 steel for turbine part steel sheet from being mixed with water when transporting the steel; it is necessary to prevent the 51CrV4 steel for turbine part steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when loading the 51CrV4 steel for turbine part steel sheet on the truck Good luck.

Weathering steel generally adopts the process route of fine material into the furnace-smelting (converter, electric furnace-microalloying treatment-argon blowing-LF refining-low superheat continuous casting (feeding rare earth wire)-controlled rolling and cooling. The scrap steel is added into the furnace together with the charge, and smelted according to the conventional process. After the 51CrV4 steel for turbine part steel is tapped, deoxidizers and alloys are added. After the molten steel is treated with argon blowing, the molten steel is cast. By adding rare earth elements to the steel, the 51CrV4 steel for turbine part weathering steel is purified and the content of inclusions is greatly reduced.



Recently updated information