38Cr2 EN 10083-3 steel steel width mm

BBN employees work hard and work hard in their work. In life, colleagues care about each other, like a family, and accompany each other at important moments in life. BBN Steel organizes employees to carry out tourism activities every year, so that families can be exposed to nature and relax physically and mentally. The good combination of working and rest can achieve the goal of hard work and happy life.

The preparation of 38Cr2 EN 10083-3 steel galvanized steel before welding is the same as that of ordinary low-carbon steel. It is necessary to carefully handle the groove size and nearby galvanized layer. In order to achieve penetration, the groove size shall be appropriate, generally 60 ~ 65 °, with a certain gap, generally 1.5 ~ 2.5mm; in order to reduce the penetration of zinc into the weld, the galvanized layer in the groove can be removed before welding. In the practical work, the centralized beveling, no blunt edge technology for 38Cr2 EN 10083-3 steel centralized control, two-layer welding process, reducing the possibility of incomplete penetration.

Cold formed hot rolled pickled automotive structural steel QSTE500TM
Material QSTE500TM chemical composition (melting analysis)%
Carbon: ≤0.12, Silicon: ≤0.35 ,Manganese: ≤1.70, Phosphorus: ≤0.03, Sulfur: ≤0.025, Titanium: ≤0.22, Niobium: ≤0.09
Aluminum : ≥0.015
Specimen test (tensile, bend, specimen is transverse; Mpa).
Yield strength MPa: ≥500
Tensile strength MPa: 550-700
Elongation: ≥17

Enterprise Motto:Integrity, harmony, dedication, innovation and developmentAbility is the cornerstone of success; action is the ladder of successGrow with the enterprise; progress with the enterpriseGive a platform to those who actually do things and a stage to those who successfully do thingsDare to be the first, to pursue excellence.