10mm thick EN10083-3 42CrMo4 and 50CrMo4 alloy steel price

10mm thick EN10083-3 42CrMo4 and 50CrMo4 alloy steel price

10mm thick EN10083-3 42CrMo4 and 50CrMo4 alloy steel price

30CrMnTi steel has higher strength and hardenability than 20CrMnTi steel, but its impact toughness is slightly lower. Mainly used as carburizing steel, it can be quenched directly after carburizing, with high bending strength and good wear resistance. It can be used after quenching, low temperature tempering or quenching and tempering, with medium machinability. 30CrMnTi steel can be used in the manufacture of heavy-duty carburized parts with large cross-sections and gears, gear shafts, worms, etc. with large forces in the tractor industry.

BBN steel EN10083-3 42CrMo4 and 50CrMo4 alloy steel 15mm to 35mm thick size: 15*2120*5620, 17.5*2320*13000, 18*2450*5500, 20*3000*5000, 19*2580*4700, 19.5*1970*4000, 20*1600*7740, 20.5*2370*7000, 21*2650*7500, 21*1920*8220, 22*1380*7650, 22*1800*8000, 22.5*1680*8450, 23*3000*11980, 23.5*2080*8100, 24*1560*6200, 25.5*2330*8300, 26*3010*8100, 26.5*2000*7000, 27*2550*6800, 27.5*2700*5500, 29*2550*9000, 29*2870*12000, 32*3300*6000, 33*2340*6700, 34*2120*6100, 35*1300*4100.

For the EN10083-3 42CrMo4 and 50CrMo4 alloy steel construction industry, the largest consumer sector of the steel industry and the least affected industry in the EU this year, it is estimated that EN10083-3 42CrMo4 and 50CrMo4 alloy steel steel consumption will account for 35% of the EU steel consumption market this year. Uestf forecasts that the output of the construction industry will decline by 5.3% in 2020 and rise by 4% in 2021.

Due to the high cost support of raw material end and the re attack of environmental protection and production restriction of steel enterprises, the market supply is limited and EN10083-3 42CrMo4 and 50CrMo4 alloy steel traders are willing to support the price. However, the influence of off-season continues, the terminal demand is greatly reduced, and the downstream merchants mainly purchase on rigid demand. The overall delivery performance is not good. It is expected that the EN10083-3 42CrMo4 and 50CrMo4 alloy steel price will be adjusted steadily tomorrow.



Recently updated information