What is the weight of 50CrMo4 tensile strength ksi 3/4-inch steel plate

What is the weight of 50CrMo4 tensile strength ksi 3/4-inch steel plate

What is the weight of 50CrMo4 tensile strength ksi 3/4-inch steel plate

In line with the service concept of "honesty first, customer first" and the service tenet of "all for customer satisfaction", the company adopts the acceptance and response mode of combining manual and automatic, and accepts the diversified service demands of customer business consultation, complaint declaration, business acceptance, etc. through telephone, fax, e-mail, visit, letter, etc.

Q370q steel is a kind of bridge steel plate. It is delivered in hot rolled, normalized condition. There are three quality levels Q370qC, Q370qD, and Q370qE. Bridge steel Q370qC, Q370qD, 50CrMo4 tensile strength ksi and Q370qE steel plates have different impact temperatures: C represents 0℃, D represents -20 ℃, and E represents -40℃. Q370qC-Z25 steel plate can be hot-rolled and normalized heat-treated. When mechanical properties are required, large thickness must be normalized. The thickness of Q370q steel plate we supply is above 8mm.

Mechanical properties of 45# steel high-quality carbon structural steel: Tensile strength σb (MPa): ≥600, yield strength σs (MPa): ≥355, elongation δ5 (%): ≥16, section shrinkage ψ (%): ≥40, impact energy Akv (J): ≥39. 45# steel impact toughness value αkv (J / cm2): ≥49 (5), hardness: unheated, ≤229HB; annealed steel, ≤197HB. 50CrMo4 tensile strength ksi, 45# steel chemical composition % (Carbon: 0.42 to 0.50, Silicon: ≤0.40, Manganese: 0.50 to 0.80, Sulfur: ≤0.045, Phosphorus: ≤0.045, Chromium: ≤0.40, Nickel: ≤0.40, Molybdenum: ≤0.10).

Low-alloy high-strength steel grades are designed to have quite good notch toughness for their intended structural use. The applicability of the notch toughness of specific grades of low-alloy high-strength steel is either based on existing use experience or combined with the results of the impact test of notched specimens. In order to meet the very strict requirements of certain applications, some 50CrMo4 tensile strength ksi, low-alloy high-strength steels produced have excellent notch toughness. For example, controlled hot rolling technology is usually used to produce low-alloy high-strength steel plates for the manufacture of welded line pipes. Such steel pipes need to meet the requirements of relevant standards for notch toughness.

Our company has established and constantly improved the customer service system and emergency response system. Through the customer service management system, we track the service of the after-sales service team and provide efficient and standard services in time. At the same time, the company formulates a regular return visit system, compares the historical cases of customer problems, proposes a pre solution, and ensures that the service is in place in a short time.

Over the years, the company has maintained long-term stable business relationships with major domestic steel mills and foreign steel companies. The company's main boiler and pressure vessel steel plates, low alloy high-strength steel plates, wear-resistant steel plates, corrosion-resistant steel plates, 50CrMo4 tensile strength ksi bridge steel plates , strucural teel plates, steel plates for alloy structures, mold steel plates, steel plates for shipbuilding and production platforms, composite steel plates, steel plates for oil and gas pipelines. Welcome to come China and visit our 50CrMo4 tensile strength ksi production line.



Recently updated information