The properties of 25CrMo4 grade to EN 10083-3
Customer service center has provided after-sales service for many large-scale information systems, and has accumulated rich working experience in the process of 25CrMo4 grade to EN 10083-3 service for many years. It can provide accurate, timely and high-quality support and service for users, which is well received by users.
The advantages of 25CrMo4 grade to EN 10083-3, steel plate produced from coil: price is cheap and length can be freely determined; transportation is convenient, no need to consider according to the size of steel plate; cutting is convenient, according to the actual needs of steel plate size cutting, and finally can effectively save materials. The disadvantage of steel plate produced from coil: there will be great welding deformation during welding, which is difficult to adjust. Therefore, the steel plate produced from coil can not be used for parts with high requirements on appearance quality.
35SiMn steel chemical elements: C: 0.32-0.40, Si: 1.10-1.40, Mn: 1.10-1.40. The mechanical properties of 35SiMn steel: tensile strength 885 MPa; yield strength 735 MPa; elongation after fracture: 15; reduction of area: 45; impact energy: 47J. 35SiMn steel belongs to alloy quenched and tempered steel with good properties and can be used instead of 40Cr steel. After quenching and tempering, 25CrMo4 grade to EN 10083-3, 35SiMn steel has high static strength, fatigue strength, wear resistance, good toughness, good hardenability and medium plasticity during cold deformation.
Strong pressure resistance of 25CrMo4 grade to EN 10083-3, boiler steel tube: The wall thickness of boiler steel tube is very important, because the steam pressure is very large, if the wall thickness is very thin, it will be broken by the steam pressure released instantly. The boiler steel tube has good high temperature resistance performance: the steam temperature in the pipeline can reach hundreds of degrees Celsius above. If the high temperature resistance performance is not enough, the boiler steel tube will be melted by the high temperature brought by the steam.
The company conducts periodic and targeted training and guidance for after-sales service personnel. As the saying goes, "no one is perfect, no gold is red", to help after-sales service personnel improve service skills and correct service attitude. Carry out relevant technical training for after-sales service personnel, so that after-sales service practitioners have professional product knowledge.
The high strength 25CrMo4 grade to EN 10083-3 low alloy steel, which is shorten as HSLA steel, is one of our main products. We have professional team to serve you. For any demands or questions about HSLA steel, for example, ASTM A572 grade 50 chemical composition, difference between S355JR and S355J2, mechanical properties of 25CrMo4 grade to EN 10083-3 ST52 steel, Q345B tensile strength, Q345D steel ASTM equivalent, HSLA steel price etc. , please do not hesitate to contact us and consult.