High quality matiere 34crmo4 manufacture
Customer service center has provided after-sales service for many large-scale information systems, and has accumulated rich working experience in the process of matiere 34crmo4 service for many years. It can provide accurate, timely and high-quality support and service for users, which is well received by users.
ASTM A514 steel is mainly used in places where high tensile strength and high yield are required, such as engineering vehicle lifting gears, large excavators, offshore platforms, etc. Different grades of A514 steel plate have different thickness, chemical composition and properties. However, the matiere 34crmo4 mechanical properties specified in ASTM A514 are similar to those of Q690 in China. A514 grade Q is generally used as the rack for offshore platform. Its hardness is between 230-390MPa, yield is greater than 630MPa, and tensile strength is more than 700MPa.
SA514 grade S high strength steel alloy element composition%C: 0.11-0.21, Si: 0.15-0.45, Mn: 1.10-1.50, P max.: 0.035, S max.: 0.035, B max.: 0.005, Mo: 0.10-0.60, V max.: 0.06.The mechanical properties in thickness (mm) T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥,%: 18
The elongation of low alloy high strength steel is 15% - 23%, and the impact absorption energy is more than 34J at room temperature. The matiere 34crmo4, low alloy high strength steel has good plasticity and impact resistance, which can avoid brittle fracture during impact, and make cold bending and welding easy. In addition, the brittle transition temperature of low alloy high strength steel is low, and the absorbed work value of Grade E steel is not less than 27J at - 40℃. This is of great significance to the engineering components and transportation tools such as vehicles, ships, offshore oil platforms, containers, bridges and so on.
The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.
Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our matiere 34crmo4 products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.