Basic requirements for 50CrMo4 tensile test for fastener

Basic requirements for 50CrMo4 tensile test for fastener

Basic requirements for 50CrMo4 tensile test for fastener

Customer service center has provided after-sales service for many large-scale information systems, and has accumulated rich working experience in the process of 50CrMo4 tensile test for fastener service for many years. It can provide accurate, timely and high-quality support and service for users, which is well received by users.

The yield strength of 50CrMo4 tensile test for fastener A32, D32, E32, F32 is not less than 315N/mm^2, and the tensile strength is 440~570N/mm^2. The grades A, D, E and F indicate that they can be 0 and -20 respectively. The impact toughness can reach -40℃, -60℃.

According to GB 11251 technical standard, the chemical composition of 40Cr structural steel plate is as follow: Carbon content is 0.37-0.44 %, Silicon content is 0.17-0.37%, Manganese content is 0.50-0.80%, Chrome content is 0.80-1.10%. 40Cr steel is usually in shape of 40Cr steel plates and bars. 50CrMo4 tensile test for fastener, GB 11251 is for 40Cr structural steel plate with thickness range of 4-30mm. The tensile strength of 40Cr structural steel plate is 550-800Mpa. And its min. Elongation is 16%.

The difference between 50CrMo4 tensile test for fastener, hot rolled sheet and cold rolled sheet: hot rolled sheet has low hardness, easy processing and good ductility. The cold-rolled sheet has high hardness and relatively difficult processing, but it is not easy to deform and has high strength. The cold rolled sheet is mostly used in automobile manufacturing and electrical products. Therefore, the two have their own characteristics. According to these characteristics, it is more appropriate to choose the right rolled plate to maximize its effect and benefit.

From the order to the delivery, there are three quality inspections to ensure that the qualified rate of finished products is more than 100%. We promise that every order will be tracked in a timely manner to ensure that customers can receive goods safely and constantly listen to their opinions and suggestions, reflect on our own problems, and let customers feel at ease. We have a large warehouse in Shanghai and Tianjin, which can provide customers with sufficient sources of supply.

We have replenish steel materials stocks, now there are huge stocks of S355JR, A36, 50CrMo4 tensile test for fastener A572 Gr 50, 16Mo3, A516 Gr 70, ABS grade A, AH32, AH36, EH36, SPA-H, SG295,SM700C etc steel materials. We can arrange delivery for those stock steel products within short time. Meanwhile, we also provide further processing for the 50CrMo4 tensile test for fastener steel materials, such as cutting, drilling, bending, welding, etc. Please do not hesitate to contact us if you have any steel demands.



Recently updated information

    SQL Error: select id,classid,ttid,onclick,plnum,totaldown,newspath,filename,userid,username,firsttitle,isgood,ispic,istop,isqf,ismember,isurl,truetime,lastdotime,havehtml,groupid,userfen,titlefont,titleurl,stb,fstb,restb,keyboard,eckuid,title,ftitle,newstime,titlepic,smalltext,diggtop from ***_ecms_news where (classid='3') and (id<$navinfor[id]) order by id DESC limit 6