What is the strongest 34crmo4 qt for turbine part?

What is the strongest 34crmo4 qt for turbine part?

What is the strongest 34crmo4 qt for turbine part?

The quality inspection department is responsible for the inspection management of raw materials and finished products, and the quality inspection and acceptance of products and raw materials. Strictly abide by the company's management system, conscientiously exercise the management power given by the company, and put an end to all ultra vires; be responsible for the inspection of all kinds of raw materials entering the company, and put forward quality problems and handling opinions.

The 34crmo4 qt for turbine part processing performance is good. Due to the uniform control of steel plate performance, excellent performance coordination and good toughness guarantee, the steel plate bending processing, drilling, cutting and other mechanical processing properties are excellent. In addition, the surface of the 34crmo4 qt for turbine part steel plate is smooth and beautiful by inhibiting and removing oxide scale from slab heating to rolling process and heat treatment in furnace without oxidation atmosphere.

A131 EH36 steel is high strength marine grade hull structural steel. Its yield strength is no less than 355Mpa, tensile strength is 490-620 Mpa, and elongation is 19% min. 34crmo4 qt for turbine part, EH36 steel strength is close to S355 steel. However, EH36 steel is shipbuilding steel, while S355 steel is carbon structural steel, and can not be certified by classification society. That is to say, S355 steel is not allowed to be used for ship building when there is certificate requirement. A131 EH36 steel is widely used to build ships working in low temperature water.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.



Recently updated information