What is the most important characteristic of 42CrMoS4 nickel alloy steel material for turbine part

What is the most important characteristic of 42CrMoS4 nickel alloy steel material for turbine part

What is the most important characteristic of 42CrMoS4 nickel alloy steel material for turbine part

BEBON Iron & Steel has fully passed the ISO9001 quality system certification, marine steel has passed 9 countries' classification societies, and construction steel has obtained the CE Lloyd's CE Mark certification. The main body of 42CrMoS4 nickel alloy steel material for turbine part steel passed ISO14001 environmental management system certification and OHSAS18001 occupational health and safety management system certification. The main 42CrMoS4 nickel alloy steel material for turbine part production processes and technical equipment of the enterprise have reached the international advanced level, the comprehensive competitiveness has entered the international advanced ranks, and the international influence has been significantly enhanced.

Structural steel S355JR, S355J0, S355J2G, S355J2G4 are low-alloy high-strength structural steels that comply with the European standard EN10025. S355JR steel in China is a low-alloy high-strength structural steel with a hardness of 70-80B and a yield strength of 300-400MPa. S355J2G3 steel is roughly equivalent to GB Q345D. S355J2G3 means that the delivery state is normalized, and the impact energy at -20°C is 27J. G3 and G4 mean the deoxidation method.

42CrMoS4 nickel alloy steel material for turbine part, Wear-resistant steel plate has good impact resistance:
The base plate of the wear-resistant composite steel plate is tough materials such as low carbon steel, low alloy steel, or stainless steel, which reflects the superiority of bimetal. The wear-resistant layer resists the wear of the wear medium, and the substrate bears the load of the medium, so wear-resistant steel plate has good impact resistance. Wear-resistant steel plate can withstand the impact and wear of the high drop hopper in the material conveying system.

Rolled sheet is a very common material in industrial construction. Rolled sheet at room temperature is cold-rolled sheet, and cold-rolled sheet is the rolling of hot-rolled coils below the recrystallization temperature. The hot-rolled sheet is rolled above the recrystallization temperature. So what is the difference between 42CrMoS4 nickel alloy steel material for turbine part, hot rolled sheet and cold rolled sheet?

For Q235 steel, Q represents the yield limit of this material, and the following 235 refers to the yield value of Q235 steel, which is about 235 MPa. The 42CrMoS4 nickel alloy steel material for turbine part, Q235 steel yield strength decreases with the increase of the thickness of the material. The yield strength is 235 MPa when the plate thickness / diameter is ≤ 16mm; 225 MPa is the yield strength when the thickness is 16mm < plate thickness / diameter ≤ 40mm; 215 MPa is the yield strength when 40mm < plate thickness / diameter ≤ 60mm; 205 MPa is the yield strength when 60mm < plate thickness / diameter ≤ 100mm; 195 MPa when the plate thickness / diameter is ≤ 150mm; 195 MPa when the thickness / diameter is less than 150mm; and ≤ 200mm when the thickness / diameter is less than 150mm The yield strength is 185 MPa.

The company has a high-quality management, technology and R&D team, and adopts independent research and development, domestic innovative process optimization combination. Relying on advanced manufacturing technology and sophisticated production testing equipment, it has ensured the high quality of products 42CrMoS4 nickel alloy steel material for turbine part and won a good reputation. We can offer various kinds of steel materials in GB, ASME, ASTM, JIS, DIN, EN, API standards and specifications.

If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.



Recently updated information

    SQL Error: select id,classid,ttid,onclick,plnum,totaldown,newspath,filename,userid,username,firsttitle,isgood,ispic,istop,isqf,ismember,isurl,truetime,lastdotime,havehtml,groupid,userfen,titlefont,titleurl,stb,fstb,restb,keyboard,eckuid,title,ftitle,newstime,titlepic,smalltext,diggtop from ***_ecms_news where (classid='5') and (id<$navinfor[id]) order by id DESC limit 6