What is the matiere 34crmo4 elongation
Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection report to the customer. For each order, no matter its quantity and value, our quality control departemnt will make strict inspection before delivery, the inspection contents include apperance, tolerance, dimension, mark, special requirements of customers, etc. To guarantee our steel materials sent to the customer is qualified.
In the manufacturing process of boiler pressure components, raw materials must undergo complex processing deformation and welding, so the steel used to manufacture the boiler must also have good process performance. All materials matiere 34crmo4 used to manufacture pressure parts must conform to the relevant national standards for boiler steel. The defects such as delamination, non-metallic inclusion, porosity and looseness in the steel shall be as few as possible, and white spots and cracks are not allowed.
SA514 grade T asme structural steel plate element composition%C: 0.08-0.14, Si: 0.40-0.60, Mn: 1.20-1.50, P max.: 0.035, S max.: 0.010, B max.: 0.005, Mo: 0.15-0.30, V: 0.03-0.08The mechanical properties in thickness (mm) T≤65Yield strength (≥Mpa): 690Tensile strength (Mpa):760-895Elongation in ≥,%: 18
Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.