What is the 38Cr2 EN 10083-3 steel shapes

What is the 38Cr2 EN 10083-3 steel shapes

What is the 38Cr2 EN 10083-3 steel shapes

Vigorously develop circular economy: the company adheres to the development path of circular economy, realizes the efficient utilization of energy and 38Cr2 EN 10083-3 steel resources, implements "four closed circuits" for renewable gas, industrial water, solid waste and waste heat steam according to the reduction of resource consumption - reuse - recycling, vigorously promotes advanced technologies such as energy-saving new technologies, new processes, 38Cr2 EN 10083-3 steel new materials, and promotes the competition of enterprises Struggle.

15CrMo alloy plate is a pearlite structure heat-resistant steel, which has high thermal strength (δb≥440MPa) and oxidation resistance at high temperature, and 38Cr2 EN 10083-3 steel has certain hydrogen corrosion resistance. Due to the high content of Cr, C and other alloy elements in 15CrMo alloy plate, the steel has obvious hardening tendency and poor weldability. The weight calculation formula of 15CrMo alloy plate: length × width × thickness × 0.00785 = kg / m. Delivery status of 15CrMo alloy plate: hot rolling, controlled rolling, normalizing, high temperature tempering, QT, etc.

Wear resistant steel plate has high wear resistance:
The thickness of wear-resistant layer of wear-resistant steel plate is 3-12mm, the hardness of wear-resistant layer can reach HRC58-62, the wear resistance is 15-20 times of ordinary steel plate, 5-10 times of low-alloy steel plate, 38Cr2 EN 10083-3 steel, and 2-5 times of high chromium cast iron. The wear resistance is far higher than spray welding and thermal spraying.

What is 38Cr2 EN 10083-3 steel, boiler steel consumption rate? The cost of the boiler, to a large extent, depends on the steel consumption of the boiler. The so-called boiler steel consumption rate refers to the tons of boiler steel used per 1t / h evaporation capacity of the boiler, also known as the boiler steel consumption per unit evaporation. The boiler steel consumption rate of boilers with different parameters, capacities and structures is different.

38Cr2 EN 10083-3 steel, S235JR VS S275JR VS S355JR plates in yield strength: For plate thickness ≤16mm, the min. yield strength of S235JR plates is 235 Mpa, S275JR plates is 275 Mpa, S355JR plates is 355 Mpa. The yield strength of S235JR S275JR S355JR plates reduces with the increasing of plate thickness. S235JR VS S275JR VS S355JR plates in tensile strength: For plate thickness 3-100mm, the tensile strength of S235JR plates is 360-510 Mpa, S275JR plates is 410-560 Mpa, S355JR plates is 470-630 Mpa. For plate thickness 100-150mm, the tensile strength of S235JR plates is 350-500 Mpa, S275JR plates is 400-540 Mpa, S355JR plates is 450-600 Mpa.

The high strength 38Cr2 EN 10083-3 steel low alloy steel, which is shorten as HSLA steel, is one of our main products. We have professional team to serve you. For any demands or questions about HSLA steel, for example, ASTM A572 grade 50 chemical composition, difference between S355JR and S355J2, mechanical properties of 38Cr2 EN 10083-3 steel ST52 steel, Q345B tensile strength, Q345D steel ASTM equivalent, HSLA steel price etc. , please do not hesitate to contact us and consult.

Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel 38Cr2 EN 10083-3 steel plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.



Recently updated information