What is special-shaped alloy steel pipe grades
Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the alloy steel pipe grades project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of alloy steel pipe grades customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.
The Performance requirements of low alloy structural steel, alloy steel pipe grades:(1) High strength: generally, the yield strength is above 300Mpa.(2) High toughness: the elongation is required to be 15% - 20%, and the room temperature impact toughness is greater than 600kJ/m ~ 800kJ/m. For large welded components, higher fracture toughness is required.(3) Good weldability and cold forming property.(4) Low cold brittle transition temperature. (5) Good corrosion resistance.
DIN 17100 St37-2 steel plate belongs to the carbon and low alloy high strength steel plate. We can supply the different sizes of alloy steel pipe grades, DIN 17100 St37-2 steel plate. And the rolling size of DIN 17100 St37-2 steel plate is following: the thickness range is 1.2-600mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. Also note that the DIN 17100 St37-2 steel coil thickness should not exceed 25 mm.
Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel alloy steel pipe grades plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.