What does 38Cr2 EN 10083-3 steel stand for?

What does 38Cr2 EN 10083-3 steel stand for?

What does 38Cr2 EN 10083-3 steel stand for?

Chrome-Moly low alloy steel 38Cr2 EN 10083-3 steel series contains 0.5% - 9% Cr and 0.5% - 1% Mo and lower than 0.20% carbon. 40CrNiMoA, 4340 and SNCM439 are the low alloy chromoly steel materials from the different standards. 40CrNiMoA steel 38Cr2 EN 10083-3 steel is a Chinese standard chromium-molybdenum high strength steel with good hardenability and toughness.

S355NL normalized steel has different impact energy requirement for impact tests at different temperature environment. S355NL plate shall be done impacting test in longitudinal direction under -50℃ with the minimum energy 27J. When customers request done charpy_V notch test under -20℃,then the impacting energy shall be above 47J. For the transverse direction,the engery shall be above 16J under the temperature -50℃. The 38Cr2 EN 10083-3 steel, steel Grade S355NL making process shall according to EN10025-1.

Q345D seamless pipe has good comprehensive mechanical properties, low temperature impact toughness, cold stamping and cutting processability, weldability. In Q345D seamless pipe, Q is the abbreviation of yield strength, 345 is the yield strength value, that is, the yield strength of Q345D seamless pipe is 345 MPa, and D is the impact temperature, which is minus 20℃. 38Cr2 EN 10083-3 steel, Q345D seamless pipe is widely used in various welding structures, such as bridges, vehicles, ships, pipelines, boilers, large vessels, storage tanks, heavy machinery and equipment, mining machinery, power stations, plant structures, low-temperature pressure vessels, textile machinery parts, etc.

The chromium plays an important role in 38Cr2 EN 10083-3 steel, Chromium Molybdenum steel. The chromium can form a dense oxide film with strong adhesion on the surface of the steel plate, so as to prevent the internal metal from further oxidation or corrosion. The higher the chromium content in the steel plate, the denser the oxide film, and the better the oxidation resistance and corrosion resistance of the steel plate.

Supply Range of Carbon Steel C45 Round Bar
Round Bar: diameter 8mm – 3000mm
38Cr2 EN 10083-3 steel Plate: thickness 10mm – 1500mm x width 200mm – 3000mm
C45 Steel Flat Bar: 200mm – 1000mm
Square Steel: 20mm-800mm
Surface Finish: Black, Rough Machined, Turned or as per given requirements.

There is a silo technology R&D center in our company with many experts. Our technical backbones go abroad to study advanced technologies regularly to make our technology and products leading in the world. We provide our customers with 38Cr2 EN 10083-3 steel high-quality steel plates, the excellent quality from specialty. With good reputation, high-quality products, strong strength, and low prices, we welcome the clients from the world to come to visit our factory.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.

Recently updated information