What are the quality requirements of alloy 50CrMo4 steel

Based on the main alloy 50CrMo4 steel business of iron and steel, we are committed to producing high-quality, green and efficient steel products. The main steel products are medium and heavy plate, hot rolled coil, section steel, steel tube, etc., which are widely used in automobile, oil, railway, bridge, construction, electricity, transportation, machinery, shipbuilding and other important fields. Our steel alloy 50CrMo4 steel products are exported to Indonesia, Bangladesh, Myanmar, Iran, Brazil, Mexico, UAE, Iraq, etc Egypt, Mozambique, Ukraine and other dozens of countries and regions.

Normalizing is a heat treatment that improves the toughness of steel. After the steel components are heated to 30-50°C above the Ac3 temperature, they are kept for a period of time and then air cooled. The main feature is that the cooling rate is faster than annealing but lower than quenching. During normalizing, the crystal grains of the steel alloy 50CrMo4 steel can be refined in a slightly faster cooling. Not only can satisfactory strength be obtained, but also the toughness (AKV value) can be significantly improved and reduced The tendency of the component to crack.

Pressure vessel plates alloy 50CrMo4 steel are used to manufacture pressure vessel equipment in petrochemical, gas separation and gas storage and transportation equipment. It is required to have sufficient strength and toughness, good welding performance and hot and cold processing performance. The general heat treatment of Q345R plate is hot rolling, controlled rolling, normalizing. The impact temperature is normal temperature, 0 ° C, -20.

When phosphorus, copper, chromium, nickel and other trace elements are added to the steel, alloy 50CrMo4 steel, a dense and strong adhesive protective film will be formed on the steel surface, which will prevent the corrosion from spreading and developing inward, and protect the substrate under the rust layer, so as to slow down the corrosion rate. The amorphous spinel oxide layer of about 50 μ m ~ 100 μ m thickness formed between the rust layer and the substrate is compact and has good adhesion with the substrate metal.

alloy 50CrMo4 steel, ASTM A131 shipbuilding steel has different grade levels. The ordinary strength shipbuilding steel grades are grade A/B/D/E. Their min. yield strength is 235 Mpa, and tensile strength is 400-520 Mpa. The higher strength shipbuilding steel grades are grade AH32/DH32/EH32/FH32, AH36/DH36/EH36/FH36 AH40/DH40/EH40/FH40. The min. yield strength of AH32/DH32/EH32/FH32 steel is 315 Mpa, and tensile strength is 440-590 Mpa. The min. yield strength of AH36/DH36/EH36/FH36 steel is 355 Mpa, and tensile strength is 490-620 Mpa. The min. yield strength of AH40/DH40/EH40/FH40 steel is 390 Mpa, and tensile strength is 510-650 Mpa.

Our focus on quality has helped us create an efficiently organised production system, which can supply large-scale piping orders as well as tailor-made orders for smaller clients. We have also created a sales and support network which stretches from Asia to Europe, UAE, South Africa and South America.

After sales service support personnel pay attention to commitment in their work. In the process of people to people communication, mutual trust is an important factor for the long-term and stable communication. After sales service personnel must do what they say in the process of communication with customers.