Is 51CrV4 flat steel for turbine part mild steel?
The company now has 51CrV4 flat steel for turbine part oversea market department, sales and supply department, finance department, logistics department, technical equipment department, quality management department, production department and other departments. The staff with college degree or above accounted for more than 80%, and there were more than 51CrV4 flat steel for turbine part 30 professional and technical personnel. The LSAW pipe production line can produce welded pipes with Φ350-1800mm, wall thickness 6-80mm, and length 2-12m.
Ordinary 51CrV4 flat steel for turbine part carbon steel mainly refers to the steel whose mechanical properties depend on the carbon content in the steel, and generally does not add a lot of alloy elements. Ordinary carbon steel is the abbreviation of ordinary carbon structural steel. Carbon content is less than 0.38%, and less than 0.25% is the most commonly used. It belongs to low carbon steel. In the Chinese standard, each metal grade indicates the low yield point of the steel when the thickness is less than 16mm. Compared with high-quality carbon steel, the limitation of carbon content, performance range, phosphorus, sulfur and other residual elements is wider for ordinary carbon steel.
Carbon steel is easy to be forged and processed into other products. Alloy steel and other steel products require too much investment for later processing equipment, and the processing is relatively cumbersome. In addition, the use of carbon steel has a long history, and people have rich experience to operate carbon steel, 51CrV4 flat steel for turbine part. It is more handy for the operation and processing of carbon steel. In addition, carbon steel has a wide range of adaptability, from the sea to the land. No matter high temperature or severe cold, the stability of carbon steel is always very reliable.
Generally speaking, rolled plates are easier to handle in a high temperature environment, and the heat treatment of 51CrV4 flat steel for turbine part, rolled plates is also very common. Hot rolling can not only greatly reduce energy consumption and save costs, but also improve the processing performance of metals and alloys, that is, the coarse grains in the as-cast state are broken, the cracks are healed significantly, and the processing performance of the alloy is improved.
51CrV4 flat steel for turbine part, S235JR VS S275JR VS S355JR plates in yield strength: For plate thickness ≤16mm, the min. yield strength of S235JR plates is 235 Mpa, S275JR plates is 275 Mpa, S355JR plates is 355 Mpa. The yield strength of S235JR S275JR S355JR plates reduces with the increasing of plate thickness. S235JR VS S275JR VS S355JR plates in tensile strength: For plate thickness 3-100mm, the tensile strength of S235JR plates is 360-510 Mpa, S275JR plates is 410-560 Mpa, S355JR plates is 470-630 Mpa. For plate thickness 100-150mm, the tensile strength of S235JR plates is 350-500 Mpa, S275JR plates is 400-540 Mpa, S355JR plates is 450-600 Mpa.
The company always adheres to the quality policy of "Quality First, Continuous Improvement, Customer Satisfaction" and the business philosophy of "Continuous Progress, Pursuing Excellence", as always, we look forward to cooperating with you to create a new situation for common development.Steel products 51CrV4 flat steel for turbine part price concessions, rich industry experience, complete varieties.
After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.