EN10083-3 alloy steel forged bar material spec

EN10083-3 alloy steel forged bar material spec

EN10083-3 alloy steel forged bar material spec

Our company is a large EN10083-3 alloy steel forged bar steel enterprise integrating steel plate production, sales and processing. It is a first-class agent of Shanxi Taigang, Shanghai Baosteel, Jiugang, Xi'an Huaxin, Taishan steel, Dongfang special EN10083-3 alloy steel forged bar steel and southwest special steel. It is a special dealer of famous steel plants in China, such as Columbus, NAS, acerinox, Outokumpu, Arcelor, nipponmetalindustry, nipponyakinkogyo, NSC, etc.

Ordinary EN10083-3 alloy steel forged bar carbon steel mainly refers to the steel whose mechanical properties depend on the carbon content in the steel, and generally does not add a lot of alloy elements. Ordinary carbon steel is the abbreviation of ordinary carbon structural steel. Carbon content is less than 0.38%, and less than 0.25% is the most commonly used. It belongs to low carbon steel. In the Chinese standard, each metal grade indicates the low yield point of the steel when the thickness is less than 16mm. Compared with high-quality carbon steel, the limitation of carbon content, performance range, phosphorus, sulfur and other residual elements is wider for ordinary carbon steel.

Bridge steel plate is specially used for erecting railway or highway bridges. EN10083-3 alloy steel forged bar, bridge steel plate is required to have high strength and toughness to bear the load and impact of rolling stock, and have good fatigue resistance, certain low temperature toughness and atmospheric corrosion resistance. The bridge steel plate used for bolt welding bridge should also have good welding performance and low notch sensitivity.

When the EN10083-3 alloy steel forged bar, wear-resistant steel plate is produced, relevant heat treatment must be carried out, and then forging and processing are carried out after preheating. When the wear-resistant steel plate is heat treated, the temperature should be properly controlled. The heating temperature of the wear-resistant steel plate is 810-830 degrees, and the holding time depends on the furnace loading method. Tempering temperature: 320 degrees, sufficient time is necessary, oil cooling after tempering to reduce temper brittleness.

EN10149 S600MC cold-forming steel chemical composition%
C:0.12, SI:0.50, MN:1.30, P:0.025, S:0.015, AIT:0.015
The mechanical properties
Yield strength: 600MPA
Tensile strength: 650-820MPA
Elongation: ≥11%

SG255 gas cylinder EN10083-3 alloy steel forged bar steel is widely used in petroleum, chemical industry, power station, boiler, etc, used to make the reactor, heat exchanger, separator. The company is a professional gas cylinder steel exporter and a steel stockist in china. We keep more than 1000 tons SG255 gas cylinder steel coils in EN10083-3 alloy steel forged bar stock every month. If you want to get the steel price, please do not hesitate to contact us. Any need in SG255 Chemical Composition and Mechanical Properties, please feel free to contact us by email or calling to us.

Both parties shall confirm the EN10083-3 alloy steel forged bar material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the EN10083-3 alloy steel forged bar steel plant.



Recently updated information