Effect of alloy elements on mechanical properties of 38Cr2 EN 10083-3 steel

Effect of alloy elements on mechanical properties of 38Cr2 EN 10083-3 steel

Effect of alloy elements on mechanical properties of 38Cr2 EN 10083-3 steel

BBN is a 38Cr2 EN 10083-3 steel world leader in exporting A106 / SA 106 pipe and stocks a full range of grades B/C with a size rage NPS 1/8" to NPS 48", with nominal (average) wall thickness as given in B36.10.

The 38Cr2 EN 10083-3 steel, thin steel plates are more convenient for cutting. Since the thickness of the thin steel plate is basically below 4mm, it is very easy to construct during cutting, which also reduces the work intensity of the construction personnel and speeds up the work efficiency of cutting. There are different materials for thin steel plates, such as ordinary carbon steel, high-quality carbon structural steel, alloy structural steel, carbon tool steel, stainless steel, spring steel, silicon steel for electrical engineering, etc..

09CuPCrNi-A steel is weather resistant steel. It is also called 09CuPCrNi-A weathering steel, or 09CuPCrNi-A anti-corrosion steel. 09CuPCrNi-A steel is equivalent to SPA-H, Corten B, etc. steels. Compared with those steels, 09CuPCrNi-A steel price is cheaper while the performance is similiar. That is mainly because the demands for 09CuPCrNi-A steel is very large in China, which is one of the largest steel prodction and export country. So the production capacity of 09CuPCrNi-A steel in very large in China. Consequently, the unit cost of 09CuPCrNi-A steel is cheaper.

With the increase of carbon content in the steel material, the yield point and tensile strength increase, but the plasticity and impact decrease. When the carbon content is more than 0.23%, the welding performance of the steel material becomes worse. Therefore, the carbon content of low alloy structural steel used for welding is generally less than 0.20%. The high carbon content can also reduce the atmospheric corrosion resistance of steel material, and the high carbon steel in the open air is easy to rust; in addition, carbon can increase the cold brittleness and aging sensitivity of 38Cr2 EN 10083-3 steel etc. steel material.

38Cr2 EN 10083-3 steel, SA36 steel plate is one of our main product, it is belong to the carbon and low alloy high strength steel plate. We can supply the different sizes of SA36 steel plate. And the rolling size of SA36 steel plate is following: the thickness range is 1.2-600mm, the width range is 1220-4200mm, and the length range is 5000-18000mm. Also note that the SA36 steel coil thickness should not exceed 25 mm.

The company has accumulated rich experience in long-term cooperation with new and old customers, which makes our products 38Cr2 EN 10083-3 steel more unique in the same industry, and is favored and praised by users. We always adhere to the enterprise spirit of "integrity, dedication, and people-oriented" and the business philosophy of "creating benefits for users". As a leading international steel supplier, BEBON have two warehouses which are near by Tianjin port and Shanghai port.

Customer first, reputation first, high-quality and perfect after-sales service is the extension of our product value and an important guarantee for the interests of customers. The purpose of our 38Cr2 EN 10083-3 steel service quality management system is to establish and constantly improve a scientific, reasonable and efficient service quality management system, and complete the after-sales service quality guarantee work of customers fairly, accurately and timely, For our company's 38Cr2 EN 10083-3 steel customer service to establish a good, comprehensive, full service system.

Recently updated information